Aero AT-3 is a side by side two-seater training and tourism Polish cantilever low-wing monoplane and fixed tricycle landing gear. Designed by Tomasz Antoniewski in 1997, the AT-3 is largely inspired by Pottier P.220S Koala. In response to criticism, particularly in Britain, the basic version has been changed from 28 cm stretched fuselage, empennage deeper modification of the bonnet to facilitate visits by a replacement engine Rotax 912S 100 ch, avionics western parking brake, ...) to become aT-3 R100.

This aircraft modeled by our friend Berju83-Virtual Pilot is his FSX creation but exported for FS2004 with ULE2 (Unlimited Export v2).

WARNING : The download is protected against hotlink: username to use is captain, password is alderaban. It's necessary to respect uppercases and lowercas when they are present.

AT3-R100-FS2004.zip(15 995.04 Kb) Downloaded 2348 times      

Menestrel_HN433.pdf(1 522.51 Kb) Downloaded 1367 times      

A new version v1.00 is ready for downloads, which an aircraft.cfg/turbulent.air adapted  !

The Druine D31 Turbulent was designed to be performed by amateur builder and this is a single-seater with a lightweight undercarriage cantilever low-wing with a tail wheel. At propulsion is powered by a 30hp (1200cc) Volkswagen (or a similar engine)

  An other version for P3D/FSX is ready under "Downloads - Aircrafts P3D" 


 

WARNING : The download is protected against hotlink: account is bordeaux, password is cognac.. It's necessary to respect uppercases and lowercas when they are present.

abd_turbulent_v1_00_FS2004.zip(11 611.46 Kb) Downloaded 2921 times      

Updated version V1.00 - le 16/11/2012
The Jodel are single-engine airplanes French. The name "Jodel" comes from the two founders of the company, "Jo" for Édouard Joly, pilot, amateur builder, farmer of his state, and "del" for his son, Jean Délémontez, aircraft mechanic, self-taught engineer. In 1950 came the first "real" production company that will be a two-seater derivative of D9, D11 to respond to a government request seeking a Learning plane flying clubs. The D11, like D9, will also be a success, especially its different versions and so will the D112 with a Continental C65 65 hp.

Peter Watskins has just uploaded the following Jodel repaints to FlightSim.com:
- HB-SVV link http://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=169743
- BHNL link http://www.flightsim.com/vbfs/fslib.php?do=copyright&fid=169744
We hope you like them!



Other versions for P3D/FSX are in the section " TDownlaods - Aircrafts P3D "

WARNING : The download is protected against hotlink: username to use is warning, password is landing. It's necessary to respect uppercases and lowercas when they are present.

abd_jodel_d112_v1_00_Fs2004.zip(17 771.60 Kb) Downloaded 2922 times      

The Demoiselle was the first light aircraft aerospace, created by engineer Alberto Santos-Dumont.

 It weighed less than 60 kg, his spine was made ​​of bamboo and was 8 feet long, the wing was made of wood covered with pine varnished silk cloth. The prototype project was his No. 19 for the price of kilometers, it has accomplished its first flight November 16, 1907 in Issy-les-Moulineaux, with a two-cylinder engine and horizontal Dutheil Chalmers 18-20 c.

WARNING : The download is protected against hotlink: username to use is gear, password is down. It's necessary to respect uppercases and lowercas when they are present.

abd_demoiselle_FS2004.zip(11 507.87 Kb) Downloaded 1939 times      

The Consolidated PBY Catalina seaplane is a military designed in the 1930s in the United States. It was widely used during the Second World War, both the U.S. Army by the other allies, performing missions varied.

The initial designation of the PBY plane was simply: "PB" for Patrol Boat, "Y" is the designation of Consolidated, its constructor. He was nicknamed by the British Catalina, in reference to Santa Catalina Island. Aircraft manufactured in Canada were designated them Canso.

This aircraft was first made ​​for "fly in X-Plane." Its creator Olivier Faivre who want to see it in other places had appealed to the FS community to make a portage.
My first attempts to bring the sources to Blender GMax date of late 2010. It was a big first for me and after a lot of research and attempts, the transformation process has been developed and is under control now (harnessed to the Savoia S21).



At present, the aircraft is already usable FS2004 via a very special compilation: it is based on an article by William Ortis on the abolition of certain limitations of compilers from Microsoft and that I had translated for www.pilote-virtuel.com.

Canso_PBY-5A_Catalina_beta1.zip(8 514.82 Kb) Downloaded 2227 times      

The R.R.A.A is an association which aims to achieve wide 3/4 a replica of De Havilland Mosquito.
This aircraft was completed after more than 15 years of efforts. Throught this port in FS2004 I wanted to pay tribute to the tenacity and courage of theses men who worked with Michel Bogaert on this project.

First RC version contained a corrupted texture (fuselage.bmp) this RC2 shall correct this error.
The texture corrected (zip of 210Ko) available for FS2004 and P3D is in the section "Downloads - Updates".



An other version P3D is in "section Downloads - P3D Aircrafts"
 

Mosquito-75_rc2_FS2004.zip(37 837.24 Kb) Downloaded 1509 times      

A worthy representative of French aviation, the amateur builders often forgotten but has increased our aircraft in the years 50-60.
 

In this adventure was my first modeling a plane, I was very fortunate to be helped by the manufacturer of the real aircraft: Jean-Claude Afflard. Although this model is still in Beta 2, the aircraft is perfectly workable and usable under FS2004 FSX/P3D (some worries texture propeller).

For more informations on this aircraft: http://www.acaatlantique.fr/2017/10/nicollier-henri-concepteur.html

WARNING : The download is protected against hotlink: username to use is henri, password is mignet. RIt's necessary to respect uppercases and lowercas when they are present.

Menestrel_HN433_beta2.zip(10 816.56 Kb) Downloaded 1936 times      

Hello,

I gave the first beta to http://pilote-virtuel.com but on this first day of January, I wanted also to make a gift to our members, and for all those who would be interested to know the project progress of this famous NC858S ...

Sorry not to have been unable to do earlier: my 8800 GTX has failed yesterday afternoon

Version is far from finished but I wanted to give away a beta version is already usable and in which many animations are functional.

I wanted to make with this airplane a laboratory to test and validate my current knowledge in terms of modeling and XML programming. This is why it could happen again 3 months before seeing a completed version.

As there is still no documentation, here are some commands that will allow you to manage:
- Personnal Options menu appears: SHIFT + 4 ... it also appears in the virtual cockpit via a click on the label F-PJDZ
- Opening doors windows: SHIFT + E ... + 2
- Opening engine cowlings SHIFT + E ... + 3
- Opening doors by clicking the mouse in VC (click on the handle or the amount)


In the virtual cockpit, the gauges are fully 3D but against the radio panel is not yet functional. It should also change to incorporate both instruments Bendix-King KT76A and KY97A.

I wanted to thank my friends Jean "Epsilon", Bernard "Beercan" and David "David W." for their assistance in this project.

Best wishes for this new year 2013

NC858S_beta3_FS2004.zip(10 872.95 Kb) Downloaded 1336 times      

The Nieuport 17 was a French biplane fighter aircraft of the First World War. It was developed by Gustave Delage (Nieuport company) and put into service in March 1916.
Derived from the Nieuport 12 equipped with a more powerful engine, larger wings and a better structure, the first aircraft were equipped with an engine of 110 hp (82 kW), later with a 130 hp engine (97 kW). It was a plane but very handy lower wings tended to break during extreme maneuvers.

From March 1916 Nieuport 17 was used by the French army, but was also adopted by most of the Allied armies. The Canadian ace Billy Bishop was awarded the Victoria Cross while flying a Nieuport 17.

The Germans were impressed by the performance of the hunter French, realized very faithful copy: the Siemens-Schuckert DI (fr) which was built in 94 copies.

Famous pilot who distinguished themselves on this unit were: Albert Ball, Billy Bishop, Georges Guynemer and Charles Nungesser.

WARNING : The download is protected against hotlink. username to use is wildlife, passord is pinguins.
It's necessary to follow the uppercase and lowercase letters when they are present.

abd Nieuport 17 v1_0.zip(83 172.69 Kb) Downloaded 3653 times      

This aircraft is from the animated film "Porco Rosso" by Hayao Miyazaki. It's called Savoia S21 and is clearly inspired by racing seaplanes 20s.
I put my hand on this plane by chance on the X-Plane forum. The X-Plane in itself is very well done. A fact increasingly common for some freeware he meets perfectly the unit of the film.
The author has made ​​available the sources Blender, I had the crazy idea to focus on the Microsoft simulators. Permission having been granted on porting 06/05/2012 by DDENN Russian author of this gem, I set to work to have this aircraft in FS2004 first.
The version that you can already download and golds is a beta (missing virtual cockpit) but it is already "flyable" FS2004 and P3D.

Savoia_S21_beta.zip(9 805.40 Kb) Downloaded 1766 times      

Once is not custom, a purely imaginary plane created by Beercan in memory of "Super-Dupont" a french comic book of Gotlib ...




A specific version P3D/FSX is ready under " Downloads - Aircrafts P3D "

WARNING : The download is protected against hotlink: username to uset is antonov, password is iliouchine. It's necessary to respect uppercases and lowercas when they are present.

abd_superdupont_FS2004.zip(27 463.93 Kb) Downloaded 1815 times      

A older aircraft created by Beercan to fly with Stearman and others oldies ...

WARNING : The download is protected against hotlink: account is spitfire, password is 1943. It's necessary to respect uppercases and lowercas when they are present.

abd_tagazou_FS2004.zip(29 333.80 Kb) Downloaded 1501 times      

Shortly before the Second World War, the French authorities wished to have a glider performance. Before the German refusal to give the plans of the famous "GrünauBaby" team Pont Saint-Vincent, under the direction of Mangeot, began to work and created a prototype inspired "Grunau" and various techniques on foreign gliders.

After many changes and modifications, the first device after the war gave birth to one of the best known French gliders at the time: the "Emouchet".

The technician point of vue:

The wing of the "Emouchet" was in the form type parasol monoplane, braced by poles streamlined adjustable tubes. It was made ​​of wood and canvas, edge and main spar were respectively worked in spruce and birch.

The fuselage was of beam type semi-shell coating work of hexagonal section. The woods used were new and okoume birch. The interior was shrouded by a removable roadster cowl with windshield cellon. The rudder was presented in a broad form and construction came with the fuselage. The horizontal tail, they were the cantilever conventional type. The lander was made for her by a resilient pad ash separated from the body by three rubber buffers.

CARACTÉRISTIQUES

Envergure: 12,48 m.
Longueur: 6,73 m.
Masse totale: 240 kg
Finesse maxi: 19 à 68 km/h.
Vitesse maxi : 120 km/h.

Other versions for P3D/FSX sont disponibles are ready under " Downlaod - Aircrafts P3D "

WARNING : The download is protected against hotlink: account is orleans, password is 1515. It's necessary to respect uppercases and lowercas when they are present.

abd_emouchet_FS2004.zip(5 747.06 Kb) Downloaded 1459 times      

This is an opportunity to test a new mode of travel to browse yours FS2004 sceneries.

Montgolfiere_v3.1.zip(4 264.32 Kb) Downloaded 1349 times      

22 Janvier 2015  Version 1 - fonctionnelle sous FS2004 et FSX:

This aircraft is the second creation under FSDS v3.5x of Régis"Jandj", member of French-VFR.
This experimental aircraft has really existed: http://en.wikipedia.org/wiki/Vought_V-173  .

 WARNING : The download is protected against hotlink: the username to used is togun, password is 1984. It's necessary to respect uppercases and lowercases when they are present.

Chance_Vought_Exp_v1.zip(3 340.24 Kb) Downloaded 1005 times      

Aero AT-3 is a side by side two-seater training and tourism Polish cantilever low-wing monoplane and fixed tricycle landing gear. Designed by Tomasz Antoniewski in 1997, the AT-3 is largely inspired by Pottier P.220S Koala. In response to criticism, particularly in Britain, the basic version has been changed from 28 cm stretched fuselage, empennage deeper modification of the bonnet to facilitate visits by a replacement engine Rotax 912S 100 ch, avionics western parking brake, ...) to become aT-3 R100.

This aircraft modeled by our friend Berju83-Virtual Pilot is his first creation for FSX but it works without any problem on P3D.

WARNING : The download is protected against hotlink: account is captain, password is alderaban. It's necessary to respect uppercases and lowercas when they are present.

AT3-R100HD_v01.zip(17 509.50 Kb) Downloaded 4382 times      

Hello,

I gave the firstbeta on http://pilote-virtuel.com but on this first day of January, I wanted also to make a gift to our members, and for all those who would be interested to know the project progress of this famous NC858S ...

Sorry not to have been unable to do earlier: my 8800 GTX has failed yesterday afternoon

Version is far from finished but I wanted to give away a beta version is already usable and in which many activities are functional.

WARNING: This version is developed for FS2004, for the moment I have only adapted the textures for FSX/P3D but:

- under FSX, some animations are not functional
- under P3D, the adaptation is better.

I wanted to make this airplane a laboratory to test and validate my current knowledge in terms of modeling and XML programming. This is why it could happen again 3 months before seeing a completed version.
 

As there is still no documentation, here are some commands that will allow you to manage:
- Personnal Options menu appears: SHIFT + 4 ... it also appears in the virtual cockpit via a click on the label F-PJDZ
- Opening doors windows: SHIFT + E ... + 2
- Opening engine cowlings SHIFT + E ... + 3
- Opening doors by clicking the mouse in VC (click on the handle or the amount)


In the virtual cockpit, the gauges are fully 3D but against the radio panel is not yet functional. It should also change to incorporate both instruments Bendix-King KT76A and KY97A.

I wanted to thank my friends Jean "Epsilon", Bernard "Beercan" and David "David W." for their assistance in this project.

Best wishes for this new year 2013

NC858S_beta3_FSX-P3D.zip(10 873.08 Kb) Downloaded 1511 times      

Version v1.1 has bring :

- pinule on the heading indicator for HDG. (corrected)
- function button heading gyro. (corrected)
- centering bar of the ball. (corrected)
- 2D popup selector for the fuel gauge. (corrected)
- Pressure gauges-intake, and fuel flow. (corrected)
- alternator circuit. (corrected)
- duplicated plygons in the canopy frame (corrected)
- nav lights and strobes still work even if disconnected battery (corrected)
- atmospheric engine (corrected).
- stall speeds in the checklist. (corrected)

This new version v1.3 includes some news corrections, including the engine and some instruments.
Here's the list:

- correction settings 235 HP engine.
- improvement of the propeller engine shutdown sequence /.
- improving the operation of radios, cut by avionics switches and battery.
- recovery popup panel switches and fuel gauge.
- more realistic positioning the center of gravity.
- improving the efficiency of the flaps.
- improving braking efficiency and compliance park brake.
- harmonize speeds references.
- additional repaint "Arc-en-ciel".

WARNING : The download is protected against hotlink: account is captain, password is alderaban. It's necessary to respect uppercases and lowercas when they are present.

Wassmer40_V1.3.zip(38 142.40 Kb) Downloaded 3838 times      

WARNING : The download is protected against hotlink: account is captain, password is alderaban. It's necessary to respect uppercases and lowercas when they are present.

AI_Wassmer_S4.zip(1 899.19 Kb) Downloaded 1785 times      

HM-290 / Pou du ciel (Flying flea):

Henri Mignet, is a famous designer of French airplanes. Creator of the formula Pou-du-ciel and initiator of the Air Sports Network (RSA), he is the father of aviation for all and amateur construction. It is thanks to him that a certain number of Frenchmen have discovered the amateur construction and the Aviation before and after the war. The "Pou du ciel" is a must and one of its greatest achievements. I propose to discover it here http://pouguide.org/

WARNING : The download is protected against hotlink: username to use is henri, password is mignet. RIt's necessary to respect uppercases and lowercas when they are present.

HM-290_Pou_H-Mignet.7z(47 060.97 Kb) Downloaded 2810 times      

Update version v1.5:

This new model is a fictional helicopter built by Bede40/Beercan on the basis of the ULM and in order to test landing operations on our french warship: FREMM Aquitaine (see French-VFR Libraries and static objects).
Mission accomplished for Bercan which could land on the FREMM several times after numerous tests. This aircraft features a new HUD integrating RFN TACAN v4.1 gauge functions.
 

This new model is designed for FSX and P3D while being compatible DX9 and DX10.

WARNING : The download is protected against hotlink: the username to used is togun, password is 1984. It's necessary to respect uppercases and lowercases when they are present.

abd_heli_MARINE_v1_5.zip(47 492.07 Kb) Downloaded 2208 times      

MAJ: JODEL D112 - Version 2017

The Jodel aircraft are single-engine French tourism. The name "Jodel" comes from the two founders of the company, "Jo" for Édouard Joly, pilot, amateur builder, farmer of his state, and "del" for his son,Jean Délémontez, aircraft mechanic, self-taught engineer.
In 1950 comes the first "real" production company that will be a two-seater derivative of D9, D11 to respond to a government request seeking an apprenticeship aircraft for flying clubs. The D11, like D9, will also be a success, especially its different versions and thus follow the D112 with a Continental C65 engine 65 hp.


This aircraft was developed natively for P3D v3.4 and run very well in FSX SP2.

WARNING : The download is protected against hotlink: username to use is warning, password is landing. RIt's necessary to respect uppercases and lowercas when they are present.

abd_Jodel _D112_FSX_P3D_2017.zip(67 159.70 Kb) Downloaded 4201 times      

Squirrel's Alouette III - Updated the 24 September 2017

^{Versions alpine & marine en :}
The Alouette III is used by the Marine Nationale for more than 50 years. If the number of these rotorcraft which has been used for rescue, anti-submarine missions and as "Pedro" is now reduced: it remains a little more than twenty ones. This shows the great capabilities of this rotorcraft, also very famous in mountains.  When this rotorcraft is disappearing for the European continent, you will be able to fly her thanks to a little team : Camille Bachmann, Benoît Dubé, Jean Michel Renaux, Raphaël Grinevald and Bernard Juniot.

This model has been made for FSX Acceleration, but has also been tried for P3D V2 without issue.
The RFN gauge version 4.2 is installed by default, but not included in the package.

This helicopter is also compatible whith P3D v4 if you change the gauge which manage the sounds. You should download news dll on the Douglass Dawson's website : https://www.douglassdawson.ca  and read the readme integrated.

WARNING : The download is protected against hotlink: account is kln90b, password is garmin. It's necessary to respect uppercases and lowercas when they are present.

Nota Bene: In the Repaints for Aircrafts, we will find the paintkit for this creation.

AlouetteIII_v1.zip(120 826.04 Kb) Downloaded 12640 times      

LFG Roland DVI by Bernard aka "Bede40"

The Roland D.VI was a German fighter aircraft built at the end of World War I. It lost a fly-off to the Fokker D.VII, but production went ahead anyway as insurance against problems with the Fokker.

In 1917, Luft-Fahrzeug-Gesellschaft also designed as Roland began to design a new fighter, the D.VI. Originality was to use a slightly different construction of the fuselage, semi-monocoque but using uniform strips of wood instead of plywood. This production was inspired by boats construction and is also known as "clinker".

Two main variants were built, D. and D. VIa VIb, differ only in the engine and other small details.

His performances were correct and he had good handling characteristics. Based on this plane, 350 were ordered, of which 150 were D.VIa and the rest D.VIB. These aircraft have reached the Western Front in August 1918, where their popularity has declined, mainly because of the prevalence of the Pfalz D. XII and Fokker D. VII. The war ended before the Roland DVI. to enter into large-scale action.

WARNING : The download is protected against hotlink: account is morgon, password is bourgogne. It's necessary to respect uppercases and lowercas when they are presen.

abd Roland D6a.zip(58 438.11 Kb) Downloaded 2964 times      

Same aircraft than the latest but this version is for Prepar3D of Lockheed Martin.

WARNING : The downlaod is protected against hotlink: username to use  is  gear, password is down. It's necessary to respect uppercase and lowercases when they are present.

abd_demoiselle_FSX-P3D.zip(11 778.57 Kb) Downloaded 2867 times      

Cessna 150 Basic Trainer V1.0:

This is François Denis and Yves Guided Franckart 's Cessna 150, developed in 2007 for Microsoft Flight Simulator FS2004. During the month of May, the two authors have done me the kindness and great honor to convey to me the sourcse of this creation in order to make a fully workable model for FSX and Prepar3D.

Released in 2008, there is no need to describe this addon, which has been the subject of several articles in the trade press of the time.

I am already working on a V2.0 is to take all advantages of the capabilities of FSX/P3D: the bumps and specular textures with also a "Damage mod" or something like a "AccuSim light" ...

8 repaints are provided in Aircrafts's repaint section, repaints created by Pierrot78 and Greenhopper from http://pilote-virtuel.com

WARNING : The download is protected against hotlink: account is micro, password is simulation. It's necessary to respect uppercases and lowercas when they are present.

Cessna 150L_FSX_P3D_v1.0.zip(44 175.19 Kb) Downloaded 13478 times      

Cessna 150-K 'Ti Bush:

French-VFR has the honor to present a special variation of the Cessna 150 delivered during 2013 Christmas. This aircraft is actually an existing plane which flies past few years over Quebec. Formerly Tail Dragger, this aircraft has changed significantly over the years through its various owners to finally get this  "Bush plane" configuration which a 150 hp!

This achievement was made possible through the collaboration of a few friends who have fallen in love with this small plane and its orange dress and with also the participation of the current owner to whom we dedicate this modest 3D modeling.

This plane has the distinction of being supplied with a Damage Mod somewhat like a AccuSim for you to live with more intensity flights you will do with him.

Lagaffe and his friends

This version has been tested on FSX DirectX10 and Prepar3D v2.4. It's "Shared Cockpit Ready"

WARNING : The download is protected against hotlink: account is micro, password is simulation. It's necessary to respect uppercases and lowercas when they are present.

C150-K_TiBush_v1.00_French-VFR.zip(72 644.55 Kb) Downloaded 10883 times      

Cessna 180-G Hydra UPDATE:

• the misfonctionnement via a mouse click of the pilot and co-pilot yokes,
• the mapping of the stabilizer under the rudder,
• to improve the efficiency of the water rudders.

Lagaffe 

WARNING : The download is protected against hotlink: account is micro, password is simulation. It's necessary to respect uppercases and lowercas when they are present.

C180-G_Hydra_v1.00_update_French-VFR.zip(3 088.93 Kb) Downloaded 2332 times      

Cessna 180-G Hydra :

French-VFR has the honor to present an other variation of the Cessna 150 delivered during 2013 Christmas. This aircraft is a fictive variation. This aircraft has changed significantly to finally obtain this  "Hydravion" configuration which a 180 hp!

This plane has the distinction of being supplied with a Damage Mod somewhat like a AccuSim for you to live with more intensity flights you will do with him.

It is based on the C150 'TiBush version and share with it some files like the documentation (sounds, gauges, Damage Mod, and also the FSX/French-VFR directory for exemple).

a) If you do not have the C150 'TiBush simply unzip the archive in your simulator.

b) If you already have the TiBush, you can omit to copy the French-VFR directory under the FSX or P3D directory. If you do not, the French-VFR directory of this archive will overwrite the previous directory and you will lose your previous settings of the C150-K Damage Mod.

Lagaffe and his friends

This version has been tested on FSX DirectX10 and Prepar3D v2.4 and it's "Shared Cockpit Ready"

WARNING : The download is protected against hotlink: account is micro, password is simulation. It's necessary to respect uppercases and lowercas when they are present.

C180-G_Hydra_v1.00_French-VFR.zip(77 503.54 Kb) Downloaded 3032 times